Hybridisation of GNSS with other wireless/sensors technologies onboard smartphones to offer seamless outdoors-indoors positioning for LBS applications

Maghdid, Halgurd (2015) Hybridisation of GNSS with other wireless/sensors technologies onboard smartphones to offer seamless outdoors-indoors positioning for LBS applications. Doctoral thesis, University of Buckingham.

Preview

Text Maghdid_2015_Hybridisation.pdf - Submitted Version Available under License Creative Commons Attribution Non-commercial No Derivatives. Download (3MB) | Preview

Abstract

Location-based services (LBS) are becoming an important feature on today’s smartphones (SPs) and tablets. Likewise, SPs include many wireless/sensors technologies such as: global navigation satellite system (GNSS), cellular, wireless fidelity (WiFi), Bluetooth (BT) and inertial-sensors that increased the breadth and complexity of such services. One of the main demand of LBS users is always/seamless positioning service. However, no single onboard SPs technology can seamlessly provide location information from outdoors into indoors. In addition, the required location accuracy can be varied to support multiple LBS applications. This is mainly due to each of these onboard wireless/sensors technologies has its own capabilities and limitations. For example, when outdoors GNSS receivers on SPs can locate the user to within few meters and supply accurate time to within few nanoseconds (e.g. ± 6 nanoseconds). However, when SPs enter into indoors this capability would be lost. In another vain, the other onboard wireless/sensors technologies can show better SP positioning accuracy, but based on some pre-defined knowledge and pre-installed infrastructure. Therefore, to overcome such limitations, hybrid measurements of these wireless/sensors technologies into a positioning system can be a possible solution to offer seamless localisation service and to improve location accuracy. This thesis aims to investigate/design/implement solutions that shall offer seamless/accurate SPs positioning and at lower cost than the current solutions. This thesis proposes three novel SPs localisation schemes including WAPs synchronisation/localisation scheme, SILS and UNILS. The schemes are based on hybridising GNSS with WiFi, BT and inertial-sensors measurements using combined localisation techniques including time-of-arrival (TOA) and dead-reckoning (DR). The first scheme is to synchronise and to define location of WAPs via outdoors-SPs’ fixed location/time information to help indoors localisation. SILS is to help locate any SP seamlessly as it goes from outdoors to indoors using measurements of GNSS, synched/located WAPs and BT-connectivity signals between groups of cooperated SPs in the vicinity. UNILS is to integrate onboard inertial-sensors’ readings into the SILS to provide seamless SPs positioning even in deep indoors, i.e. when the signals of WAPs or BT-anchors are considered not able to be used. Results, obtained from the OPNET simulations for various SPs network size and indoors/outdoors combinations scenarios, show that the schemes can provide seamless and locate indoors-SPs under 1 meter in near-indoors, 2-meters can be achieved when locating SPs at indoors (using SILS), while accuracy of around 3-meters can be achieved when locating SPs at various deep indoors situations without any constraint (using UNILS). The end of this thesis identifies possible future work to implement the proposed schemes on SPs and to achieve more accurate indoors SPs’ location.

Actions (login required)

View Item